A Manchester-based materials company is developing tiles that avoid the high-temperature kiln firing normally associated with ceramic manufacturing.
asserted
that → base → manufacturing
DeKiln's BioSintering technology uses waste gypsum plaster, a material commonly recovered from plasterboard, together with a bio-based binder to produce its Eralith tiles.
asserted
technology → use → tiles
DeKiln says the tiles contain more than 95% recycled content and are cured at low temperatures rather than fired in a kiln.
asserted
tiles → say → kiln
The company describes conventional ceramic production as requiring kiln temperatures of roughly 850°C to 1,250°C and says firing and drying account for about 80% of the ceramics industry's emissions.
asserted
firing → describe → emissions
Its current product information states that BioSintering can reduce energy consumption by up to 90% compared with conventional ceramic manufacturing.
asserted
BioSintering → state → manufacturing
The technology is still being scaled for industrial production, however, so these environmental figures should be understood as reported comparisons rather than evidence that the process has already replaced conventional tile manufacturing at large scale.
asserted
process → scale → scale
How recycled gypsum replaces conventional tile materials
The material at the centre of the process is waste gypsum plaster, or calcium sulphate dihydrate, which can be recovered from plasterboard and other construction waste.
asserted
which → recycle → plasterboard
DeKiln estimates that the UK produces about 980,000 tonnes of plasterboard waste each year and says its process can turn this waste stream into a useful manufacturing input.
asserted
process → estimate → input
The company first processes the waste gypsum into a base material with properties suitable for tile production.
asserted
company → process → production
It then combines the recycled material with a proprietary bio-based active ingredient to create a precursor designed to behave similarly to conventional ceramic tile powder.
asserted
It → combine → powder
DeKiln says its Eralith tiles currently contain more than 95% recycled gypsum plaster or recycled content, depending on the product information used, while its broader technology pages describe the recycled material as primarily waste gypsum plaster combined with a bio-based ingredient.
asserted
pages → say → ingredient
The important point is that the process replaces most of the conventional mineral feedstock with recovered material rather than relying primarily on newly extracted raw materials.
asserted
process → replace → materials
Tiles are pressed normally, but do not go through a kiln
After the recycled material and binder are mixed, the precursor is compressed using standard tile presses.
asserted
precursor → press → presses
This allows the company to use familiar manufacturing equipment rather than requiring a completely different production system.
asserted
company → allow → system
The major difference comes after pressing: instead of sending the formed tiles into a high-temperature kiln, BioSintering uses a low-temperature curing stage.
asserted
BioSintering → come → stage
DeKiln's technology page describes curing at
30°C, while its 2026 partnership announcement with Johnson Tiles describes the tiles being hardened on a drying rack at
35°C.
asserted
tiles → describe → °
DeKiln's newer manufacturing information more broadly describes its process as operating 90 °C below, reflecting different stages or configurations of the technology as it is being developed.
asserted
it → describe → technology
The company has therefore demonstrated a kiln-free route to hardening its ceramic-like tiles, but the exact curing temperature can vary according to the particular process description.
uncertain
temperature → demonstrate → description
In May 2026, DeKiln announced a pilot manufacturing project with Johnson Tiles in Stoke-on-Trent to help scale the technology.
uncertain
DeKiln → announce → technology
The company reports major reductions in emissions and energy use
asserted
company → report → use
DeKiln says its BioSintering process produces 94% lower carbon dioxide emissions and 99% lower particulate air pollution than conventional ceramic tiles.
asserted
process → say → tiles
Its current product information says these figures are supported by an independent life-cycle assessment, which gives the Eralith tiles a reported global-warming potential of 0.81 kilograms of CO₂-equivalent per square metre.
asserted
which → say → metre
DeKiln also reports energy savings of up to 90%, attributing much of the reduction to eliminating the high-temperature firing stage.
asserted
DeKiln → report → stage
The company says its tiles can achieve flexural strength of up to 25 megapascals, compared with a 12-megapascal minimum requirement it cites for ceramic tiles, and reports water absorption below 10%.
asserted
it → say → %
These performance figures describe the company's current Eralith products and should not be interpreted as meaning that every possible application has already been certified.
asserted
application → describe → products
DeKiln currently recommends the tiles for indoor wall applications in dry environments, while continuing to develop their range of uses and certifications.
asserted
DeKiln → recommend → uses
The technology is now moving from development towards industrial scale
BioSintering is designed to work with conventional tile manufacturing equipment, with DeKiln saying producers can use existing presses and other equipment without the kiln, requiring only limited modifications and retraining.
asserted
producers → move → modifications
The company has worked with organisations including the University of Manchester, Teamwork Italy and Johnson Tiles, while its technology has received support through UK innovation and engineering programmes.
asserted
technology → work → programmes
In 2025, DeKiln received funding through the Royce Industrial Collaboration Programme for the SPARK project, which aimed to move BioSintering from laboratory batch production towards pre-pilot-scale manufacturing.
asserted
which → receive → manufacturing
In 2026, the company announced a partnership with Johnson Tiles to establish a pilot manufacturing site in Stoke-on-Trent.
asserted
company → announce → Stoke
The Royal Academy of Engineering has also selected DeKiln founder Aled Roberts as a 2026 Green Future Fellow, with the Academy describing the technology as producing tiles from more than 98% recycled gypsum without kiln firing.
asserted
Academy → select → firing
The developments show that DeKiln is moving beyond laboratory research, but the company is still working through the scale-up process needed for widespread industrial production.
asserted
company → show → production
The Aporia
