Photo via Toronto Star

Vancouver General Hospital to make custom splints using 3D printing, saving time

Read the original at Toronto Star ↗
Cite

Depner, W. (2026, September 15). Vancouver General Hospital to make custom splints using 3D printing, saving time. Toronto Star. https://www.thestar.com/news/canada/british-columbia/vancouver-general-hospital-to-make-custom-splints-using-3d-printing-saving-time/article_7af5d4dc-b52c-5603-bdfa-6cac069c4509.html

Dated when The Aporia collected the article, usually within hours of publication. Check the original for its exact date and byline.

Toronto Star · collected 2026-09-15 · by Wolfgang Depner

Quick Summary

Vancouver General Hospital is set to become the first healthcare facility in North America to produce custom splints using 3D printing technology directly on site. According to Health Minister Ravi Kahlon, this innovation will streamline the process, reducing wait times and improving accuracy, which will ultimately help patients recover more quickly while also enhancing staff efficiency by freeing up time for direct patient care.
Written by AI on 2026-09-15, from this article's own text only (the story summary below draws on all the coverage).

AI analysis

Story summary

Vancouver General Hospital, the largest in British Columbia, will become the first healthcare facility in North America to produce custom splints using 3D printing technology on-site. This innovation was announced by Health Minister Ravi Kahlon. According to Kahlon, this new process will be more efficient and accurate, allowing patients to recover faster while also freeing up time for direct patient care.

Written for “3D Printing In Healthcare” on 2026-10-31, grounded in this article and the 0 other(s) covering the same event.

Story

📰 3D Printing In Healthcare
Technology · 1 article(s) covering the same event.

Compared with similar articles

Nothing to compare against. No article is close enough to this one for the pipeline to have linked or judged the pair.
How this article was measured signals, leaning charts, publisher record, byline, topics and claims

Signals How these are calculated →

Claims extracted
2
sentences that state something as happening or true
Uncertain
0%
0 of 2 hedged ("reportedly", "may", "according to")
Leaning
not political
takes no side on a contested political question
Publisher signals
64/100
Toronto Star's corrections and hedging, across everything collected from it. Not a measure of accuracy.
Outlets on this story
1
Technology
Same framing elsewhere
1
articles that frame the event the way this one does
Analyzed 2026-09-15 · how these are computed

How this is being covered How these are calculated →

Article leaning vs. publisher reliability
Source leaning vs. consistency

Publisher

Toronto Star · 10621 article(s) · 27 correction(s) detected
Running correction rate · 27 correction(s)
2026-10-26
Correction
2026-10-24
Correction
2026-10-07
Correction
2026-09-24
Correction

Who wrote this

Wolfgang Depner
28 article(s) here · 1 carrying a prediction
🔮 She says Mike Farnworth will serve as house leader, while Niki Sharma will be caucus chair.
2026-10-29 · assertive framing · Jennifer Whiteside named BC NDP interim leader
🔮 A statement from the B.C. Conservatives says she will be chair of the transition team on a volunteer basis and will be taking an unpaid leave from the pipeline firm Trans Mountain Corp. where she took on the post of interim vice-president a year ago.
🔮 The British Columbia Conservatives say their platform will create $2.6 billion in new revenue over three years, while shrinking the deficit to $10.8 billion by 2030.
🔮 While he respects Lowan, she won’t be premier, and votes for her party could end up electing a Conservative government, he said.
🔮 Deloitte Canada cuts GDP growth forecast by 20% as tariffs grip economy amid Trump's trade war Trump's trade rep sounds pessimistic about deal with Canada, saying issues are 'quite difficult to resolve' The council says the U.S. Department of Commerce has imposed countervailing duties at 14.11 per cent, an anti-dumping rate of 10.64 per cent, and the additional tariff of 10 per cent, which U.S. President Donald Trump levied on the grounds of national security.
🔮 “Either he removes her, or he very clearly would only remove a candidate where they didn’t stand a snowball’s chance in hell of winning,” he said.
🔮 Eby says his government would temporarily suspend the provincial motor fuel tax by 10 cents per litre for gas and diesel, while introducing what he calls a “price guard” to crack down on gouging at the pump.
🔮 VICTORIA - Lorne Doerkson says a future Conservative government in British Columbia under his leadership would not bring in new taxes, if elected on Oct. 24, when British Columbians head to the polls in a snap election called last week.
🔮 VICTORIA - British Columbia NDP Leader David Eby says his government would introduce a new tax on unsold condominiums and hike the existing speculation and vacancy tax to improve housing affordability if his party is re-elected on Oct. 24.
🔮 The appeal from Tim Thielmann, a lawyer and former research director for the Conservatives, comes as the party says its board would move to keep Doerkson in power should he succeed in the election called by NDP Leader David Eby.
Also by Wolfgang Depner
Jennifer Whiteside named interim BC NDP leader
2026-10-30 · The Globe and Mail
Jennifer Whiteside named BC NDP interim leader
2026-10-29 · The Globe and Mail
Nothing else under this byline is closely related to this article, so these are simply their most recent.
All 28 articles by Wolfgang Depner →

Topics

British Columbia’s VICTORIA

Subjects

British Columbia’s GPE · 1× Ravi Kahlon PERSON · 1× VICTORIA GPE · 1×

Narrative

Health Minister Ravi Kahlon says printing splints at the hospital will make the process more efficient, faster and accurate, allowing patients to recover faster and freeing up time for direct patient care.
framing: assertive · carried by 1 article(s) · first seen 2026-09-15
🔮 VICTORIA - British Columbia’s largest hospital will become the first health care facility in North America to produce custom splints using 3D printing technology on site.

Claims (2 extracted, 0 hedged)

VICTORIA - British Columbia’s largest hospital will become the first health care facility in North America to produce custom splints using 3D printing technology on site. asserted
hospital → become → site
Health Minister Ravi Kahlon says printing splints at the hospital will make the process more efficient, faster and accurate, allowing patients to recover faster and freeing up time for direct patient care. asserted
patients → say → care
💬Give feedback
🕘History 🎫Support